This page has deprecated and moved to the new documentation framework of the main Bitcraze website. Please go to [[https://www.bitcraze.io/]] and go to the menu 'products'. ====== Overview and specification ====== External 1-cell 500mA li-po charger with micro-USB connector. For full specification please see the [[https://store.bitcraze.io/collections/accessories/products/500ma-lipo-usb-charger|store]]. ====== Hardware ====== Revision A {{ :projects:accessories:chg500:chg500ma_reva.pdf |schematics}} Revision A layout seen from the top {{:projects:accessories:chg500:chg500ma_reva_layout_top.png?400 |Layout seen from top}} ====== Chaining ====== Using the P2 connector it's possible to chain multiple chargers together and only power one. This requires soldering. Below is a picture of one possible setup. Don't forget to check the rating of the connectors and make sure you use a power supply that can supply at least 500mA per charger. {{:projects:accessories:chg500:crab_chg_side.jpg?300 |}} {{:projects:accessories:chg500:crab_chg_top.jpg?300 |}}