doc:crazyflie:dev:fimware:sensor_to_control
Media Manager
Namespaces
Choose namespace
Media Files
Files in projects:crazyflie:mechanics
- all_wires_solderd_and_fixed.png
- 640×426
- 2015-07-15 16:31
- 278.5 KB
- all_wires_soldered.png
- 640×426
- 2015-07-15 16:31
- 318.2 KB
- attach_battery_centred.png
- 640×426
- 2015-07-15 16:31
- 356.3 KB
- check_shorts.png
- 640×444
- 2015-07-15 16:31
- 523.3 KB
- copter_motor_mounting.png
- 805×965
- 2015-07-15 16:31
- 73 KB
- copter_propeller_mounting.png
- 1270×981
- 2015-07-15 16:31
- 107.3 KB
- copter_propellers.png
- 1363×831
- 2015-07-15 16:31
- 68.4 KB
- cut_sticky_pad.png
- 640×426
- 2015-07-15 16:31
- 306.8 KB
- end_thread_wires_into_motor_mount.png
- 640×426
- 2015-07-15 16:31
- 315.6 KB
- insert_motor_into_mount.png
- 640×426
- 2015-07-15 16:31
- 315.6 KB
- items_required.png
- 640×427
- 2015-07-15 16:31
- 292.1 KB
- power_on.png
- 640×426
- 2015-07-15 16:31
- 298.8 KB
- press_mount_on_pcb.png
- 640×426
- 2015-07-15 16:31
- 345 KB
- propeller_chart.png
- 640×426
- 2015-07-15 16:31
- 257.1 KB
- propellers_attached.png
- 640×426
- 2015-07-15 16:31
- 287 KB
- remove_prop_excess_plastic.png
- 640×426
- 2015-07-15 16:31
- 304.3 KB
- remove_sickypad_cover.png
- 640×426
- 2015-07-15 16:31
- 300.3 KB
- repeat_steps.png
- 640×426
- 2015-07-15 16:31
- 330.3 KB
- solder_wires.png
- 640×426
- 2015-07-15 16:31
- 331.1 KB
- start_press_mount_on_pcb.png
- 640×426
- 2015-07-15 16:31
- 333.6 KB
- start_thread_wires_into_motor_mount.png
- 640×426
- 2015-07-15 16:31
- 320.3 KB
- test_ccb.png
- 640×427
- 2015-07-15 16:31
- 344.3 KB
- test_props_with_battery.png
- 640×426
- 2015-07-15 16:31
- 320.1 KB
- thread_wires_into_motor_mount.png
- 640×426
- 2015-07-15 16:31
- 300.5 KB
- twist_motor_wires.png
- 640×426
- 2015-07-15 16:31
- 327.7 KB
- twist_motor_wires_done.png
- 640×426
- 2015-07-15 16:31
- 301.4 KB
- wires_into_through_hole.png
- 640×426
- 2015-07-15 16:31
- 323.1 KB
- wires_into_through_hole_stuck.png
- 640×426
- 2015-07-15 16:31
- 292.1 KB
![[root]](/doc:crazyflie:dev:fimware:sensor_to_control?ns=&tab_files=files&do=media&tab_details=view&image=projects%3Acrazyflie%3Amechanics%3Acopter_propeller_mounting.png){kind=link}
doc/crazyflie/dev/fimware/sensor_to_control.txt · Last modified: 2020-05-12 14:25 by kimberly
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
