Differences

This shows you the differences between two versions of the page.

--- doc:crazyflie:dev:firmware:deck_memory_format [2015-08-06 12:11]
arnaud [Header]
+++ doc:crazyflie:dev:firmware:deck_memory_format [2020-05-12 14:22] (current)
kimberly
@@ Line 1: / Line 1: @@
+<WRAP center round important 60%>
+This page has deprecated and moved to the new documentation framework of the main Bitcraze website. Please go to [[https://www.bitcraze.io/documentation/system/]]
+</WRAP>
 ====== Deck memory format ======
@@ Line 30: / Line 34: @@
 The header allows to detect the deck installed and to verify that the deck stack is compatible.
-The //UsedPins// value indicates which pins the deck is driving on the expansion port. For example a UART TX pin is driving both high and low when an i2c port is only driving low. For every GPIO on the expantion port one bit indicate if the GPIO can be driven high and one bit if it can be driven low:
+The //UsedPins// value indicates which pins the **deck is driving** on the expansion port. For example a UART TX pin is driving both high and low when an i2c port is only driving low. For every GPIO on the expantion port one bit indicate if the GPIO can be driven high and one bit if it can be driven low:
 ^ Drive    ^ PC11 ^ PC10 ^ PB7 ^ PB6 ^ PB8 ^ PB5 ^ PB4 ^ PC12 ^ PA2 ^ PA3 ^ PA5 ^ PA6 ^ PA7 ^ P0.11 ^ P0.12 ^ P0.08 ^

Bitcraze Wiki