Bitcraze Wiki

User Tools

Site Tools

You are here: index » doc » crazyradio » usb
Trace:
doc:crazyradio:usb:index

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
doc:crazyradio:usb:index [2012-11-11 18:00]
arnaud [Data transfer] 		doc:crazyradio:usb:index [2013-01-06 00:14]
arnaud
Line 41: Line 41:
 | 0             | Ack received            | | 0             | Ack received            |
  
-==== Dongle configuration  summary ====+==== Dongle configuration and functions summary ====
  
 Crazyradio vendor requests summary: Crazyradio vendor requests summary:
  
 ^ bmRequestType ^ bRequest                 ^ wValue   ^ wIndex ^ wLength ^ data    ^ ^ bmRequestType ^ bRequest                 ^ wValue   ^ wIndex ^ wLength ^ data    ^
-|          0x40 | SET_RADIO_CHANNEL (0x01) | channel  | Zero   | Zero    | None    | +|          0x40 | SET_RADIO_CHANNEL (0x01)   | channel  | Zero   | Zero    | None    | 
-|          0x40 | SET_RADIO_ADDRESS (0x02) | Zero     | Zero   | 5       | Address | +|          0x40 | SET_RADIO_ADDRESS (0x02)   | Zero     | Zero   | 5       | Address | 
-|          0x40 | SET_DATA_RATE (0x03)     | Datarate | Zero   | Zero    | None    | +|          0x40 | SET_DATA_RATE (0x03)       | Datarate | Zero   | Zero    | None    | 
-|          0x40 | SET_RADIO_POWER (0x04)   | Power    | Zero   | Zero    | None    | +|          0x40 | SET_RADIO_POWER (0x04)     | Power    | Zero   | Zero    | None    | 
-|          0x40 | SET_RADIO_ARD (0x05)     | ARD      | Zero   | Zero    | None    | +|          0x40 | SET_RADIO_ARD (0x05)       | ARD      | Zero   | Zero    | None    | 
-|          0x40 | SET_RADIO_ARC (0x06)     | ARC      | Zero   | Zero    | None    | +|          0x40 | SET_RADIO_ARC (0x06)       | ARC      | Zero   | Zero    | None    | 
-|          0x40 | ACK_ENABLE (0x10)        | Active   | Zero   | Zero    | None    | +|          0x40 | ACK_ENABLE (0x10)          | Active   | Zero   | Zero    | None    | 
-|          0x40 | SET_CONT_CARRIER (0x20)  | Active   | Zero   | Zero    | None    | +|          0x40 | SET_CONT_CARRIER (0x20)    | Active   | Zero   | Zero    | None    | 
-|          0x40 | LAUNCH_BOOTLOADER (0xFF) | Zero     | Zero   | Zero    | None    |+|          0x40 | START_SCAN_CHANNELS (0x21) | Start    | Stop   | Length  | Packet  | 
 +|          0xC0 | GET_SCAN_CHANNELS (0x21)   | Zero     | Zero   | 63      | Result  | 
 +|          0x40 | LAUNCH_BOOTLOADER (0xFF)   | Zero     | Zero   | Zero    | None    |
  
 ==== Set radio channel ==== ==== Set radio channel ====
Line 157: Line 159:
 | 0             | Dongle working normally (default) | | 0             | Dongle working normally (default) |
 | Not 0         | Dongle in continuous carrier mode | | Not 0         | Dongle in continuous carrier mode |
 +
 +==== Channels scanning ====
 +
 +This function is implemented in Crazyradio version 0.5 and over.
 +
 +^ bmRequestType ^ bRequest                 ^ wValue   ^ wIndex ^ wLength ^ data    ^
 +|          0x40 | START_SCAN_CHANNELS (0x21) | Start    | Stop   | Length  | Packet  |
 +|          0xC0 | GET_SCAN_CHANNELS (0x21)   | Zero     | Zero   | 63      | Result  |
 +
 +Scan a range of channels and compile a list of channel from which an ack has been received. The command START_SCAN_CHANNELS should be executed first with start being the first scanned channel and stop the last one. Those should be within 0 to 125. The data is the packet payload sent on each channel, it should be at least one byte long.
 +
 +All parameters, except the channel, are used unmodified during the scan. If the datarate is set to 2MBPs the scan is done every second channel. To get the list of channel that answered GET_SCANN_CHANNELS should be called just after a scan. Up to 63 bytes are returned corresponding to up to 63 channels on which the packet was acknowledged.
 +
 +Note. After scanning the channel will be let to the last scanned channel.
  
 ==== Launch bootloader ==== ==== Launch bootloader ====
doc/crazyradio/usb/index.txt · Last modified: 2020-05-12 14:12 by kimberly

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki