User Tools

Site Tools


doc:lps:twr-reference-setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
doc:lps:twr-reference-setup [2018-01-22 16:16]
bjorn
doc:lps:twr-reference-setup [2018-01-23 11:14]
macke
Line 1: Line 1:
-====== Reference set-up using 6 anchors======+====== Reference set-up using 6 anchors (TWR) ======
  
-In order to illustrate how to set up a system we document a reference system and how we've set it up. In our reference setup we have placed 3 anchors above and 3 anchors bellow the flight area, shaped in inverse triangles. This allows to get good accuracy in X, Y and Z.+This reference system can be used to position in Two-way ranging mode (TWR). In this reference setup we have placed 3 anchors above and 3 anchors bellow the flight area, shaped in inverse triangles. This allows to get good accuracy in X, Y and Z. There are [[misc:investigations:lps-precision|measurements of accuracy and precision]] for this reference system.
  
-This is the reference system from which measurement where taken: 
 {{:doc:lps:loco_ref_system_6_anchors.png?1200|}} {{:doc:lps:loco_ref_system_6_anchors.png?1200|}}
  
-{{ :doc:lps:crazyflie_isometric_drawing_2.png?600 |}}+====== Reference set-up using 8 anchors (TDoA/TWR) ======
  
-====== Measurements taken from our reference set-up ====== +This reference system can be used to position in Two-Way Ranging mode (TWR) and Time Difference of Arrival mode (TDoA). In this reference setup we have placed 4 anchors above and 4 anchors bellow the flight area, shaped like a box. Note the numbering of the anchors, this allows to get good accuracy in X, Y and Z.  
-  + 
-To validate the system we took a series of measurement from the reference system. You can see the results in the page [[misc:investigations:lps-precision|Measurements of accuracy and precision of the Loco Positioning system]].+{{:doc:lps:loco_ref_system_8.png?1200|}} 
 + 
 +====== Crazyflie initial positioning ====== 
 +When starting the Crazyflie in the LPS it should be positioned according to the image below. 
 +{{ :doc:lps:crazyflie_isometric_drawing_2.png?600 |}}
doc/lps/twr-reference-setup.txt · Last modified: 2020-05-12 14:10 by kimberly