User Tools

Site Tools


misc:investigations:lps-max-range

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
misc:investigations:lps-max-range [2017-03-24 09:02]
arnaud
misc:investigations:lps-max-range [2021-06-24 16:39] (current)
kimberly
Line 1: Line 1:
 +<WRAP center round important 60%>
 +This page has deprecated and will be archived. Please go to [[https://www.bitcraze.io/]].
 +</WRAP>
 +
 ====== Measurements of maximum ranges for the Loco Positioning system ====== ====== Measurements of maximum ranges for the Loco Positioning system ======
  
Line 12: Line 16:
  
 The LEDs on the deck and anchor indicates when the module is in transmit and receive mode as well as when a ranging operation is completed. Our measurement method was simply to walk away from the anchor with the Crazyflie and watch the LEDs and observe when we stared to loose packets. The LEDs on the deck and anchor indicates when the module is in transmit and receive mode as well as when a ranging operation is completed. Our measurement method was simply to walk away from the anchor with the Crazyflie and watch the LEDs and observe when we stared to loose packets.
 +
 +The radios are setup on //channel 2// with preamble rate of //64MHz//, preamble lenght of 128 and datarate of //6.8Mbps//. Higher range can be expected with different settings like longer preamble and slower datarate, though this would also reduce the ranging speed of the system and it has not been tested in this experiment.
  
 === Power settings === === Power settings ===
misc/investigations/lps-max-range.1490342554.txt.gz · Last modified: 2017-03-24 09:02 by arnaud