Bitcraze Wiki

User Tools

Site Tools

You are here: index » projects » crazyflie2 » expansionboards » proto
Trace:
projects:crazyflie2:expansionboards:proto

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
projects:crazyflie2:expansionboards:proto [2014-09-24 19:54]
arnaud 		projects:crazyflie2:expansionboards:proto [2021-06-24 16:12] (current)
kimberly
Line 1: Line 1:
-====== Prototype expansion board ====== 
  
-The prototype expansion board allows to prototype electronic circuit to be attached on Crazylfie 2.0.+<WRAP center round important 60%> 
 +This page has deprecated and moved to the new documentation framework of the main Bitcraze website. Please go to [[https://www.bitcraze.io/documentation/system/]] or 
 +[[https://www.bitcraze.io/documentation/repository/]] 
 +</WRAP>
  
-Both throw holes some smd components can be soldered to the board. The shape of the pads makes it possible to solder SMD capacitor and resistor which saves space and weight.+====== Prototyping deck ====== 
 + 
 +The prototyping deck allows electronic circuits to be attached on Crazyflie 2.0. 
 + 
 +Both through holes and SMD components can be soldered to the deck. The shape of the pads makes it possible to solder SMD capacitor and resistor which saves space and weight.
  
 The two pad rows that are closest to the expansion connector are connected to the connectors. The two pad rows that are closest to the expansion connector are connected to the connectors.
Line 11: Line 17:
 ===== Specification ===== ===== Specification =====
   * Makes all 20 pins in the Crazyflie 2.0 expansion port available   * Makes all 20 pins in the Crazyflie 2.0 expansion port available
-  * 40 pads for prototyping (supporting both though hole and SMD components)+  * 40 pads for prototyping (supporting both through hole and SMD components)
   * Footprint for optional 1-wire memory (not mounted)   * Footprint for optional 1-wire memory (not mounted)
   * Mechanical specification:   * Mechanical specification:
Line 19: Line 25:
 ===== Detection memory ===== ===== Detection memory =====
  
-If you want your prototype board to be detected automatically by the Crazyflie, for example to activate your driver code when the board is connected, you can solder a one-wire memory DS28E05 in the pads near P1 pin 10. For more information about the automatic expansion board detection see [[projects:crazyflie2:onewire|Crazyflie 2.0 onewwire expansion board detection]]. +If you want your prototype deck to be detected automatically by the Crazyflie, for example to activate your driver code when the deck is connected, you can solder a one-wire memory DS28E05 in the pads near P1 pin 10.
- +
- +
projects/crazyflie2/expansionboards/proto.1411581266.txt.gz · Last modified: 2015-07-15 16:30 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki