User Tools

Site Tools


projects:crazyflie2:expansionboards:proto

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
projects:crazyflie2:expansionboards:proto [2016-03-30 14:24]
bjorn
projects:crazyflie2:expansionboards:proto [2021-06-24 16:12] (current)
kimberly
Line 1: Line 1:
-====== Prototyping expansion deck ====== 
  
-The prototype expansion deck allows to prototype electronic circuits to be attached on Crazyflie 2.0.+<WRAP center round important 60%> 
 +This page has deprecated and moved to the new documentation framework of the main Bitcraze website. Please go to [[https://www.bitcraze.io/documentation/system/]] or 
 +[[https://www.bitcraze.io/documentation/repository/]] 
 +</WRAP> 
 + 
 +====== Prototyping deck ====== 
 + 
 +The prototyping deck allows electronic circuits to be attached on Crazyflie 2.0.
  
 Both through holes and SMD components can be soldered to the deck. The shape of the pads makes it possible to solder SMD capacitor and resistor which saves space and weight. Both through holes and SMD components can be soldered to the deck. The shape of the pads makes it possible to solder SMD capacitor and resistor which saves space and weight.
Line 19: Line 25:
 ===== Detection memory ===== ===== Detection memory =====
  
-If you want your prototype deck to be detected automatically by the Crazyflie, for example to activate your driver code when the deck is connected, you can solder a one-wire memory DS28E05 in the pads near P1 pin 10. For more information about the automatic expansion deck detection see [[projects:crazyflie2:onewire|Crazyflie 2.0 onewire expansion deck detection]]. +If you want your prototype deck to be detected automatically by the Crazyflie, for example to activate your driver code when the deck is connected, you can solder a one-wire memory DS28E05 in the pads near P1 pin 10.
- +
- +
projects/crazyflie2/expansionboards/proto.1459340695.txt.gz · Last modified: 2016-03-30 14:24 by bjorn