Differences

This shows you the differences between two versions of the page.

--- projects:crazyflie:hardware:explained [2014-09-29 07:23]
chad [LiPo] capitalization
+++ projects:crazyflie:hardware:explained [2021-06-24 16:49] (current)
kimberly
@@ Line 1: / Line 1: @@
+<WRAP center round important 60%>
+This page has deprecated and will be archived. Please go to [[https://www.bitcraze.io/]].
+</WRAP>
 ====== Crazyflie KIT electronics explained ======
 This section is here to explain all high level electronics used in the Crazyflie.
@@ Line 35: / Line 38: @@
 Specification:
-|| Model || Voltage (V） || Capacity (mAh) || Thickness (±0.2) || Width (±0.5) || Height (±0.5) || Weight (g） || Charge Rate || Continues Discharge Rate || Burst (≤5S）||
+|| Model || Voltage (V） || Capacity (mAh) || Thickness (±0.2) || Width (±0.5) || Height (±0.5) || Weight (g） || Charge Rate || Continuous Discharge Rate || Burst (≤5S）||
 || 671723HS25C || 3.7 || 170 || 6.9 ||17 || 23 || 3.9 || 1C-5C || 25C (≥ 80%) || 50C ||
 {{:projects:crazyflie:hardware:fullriver_671723hs25c_wiki.png?500|}}
@@ Line 76: / Line 79: @@
 ===== Expansion header =====
 {{:projects:crazyflie:hardware:crazyflie_expansion_header_wiki.png?300 |}}
-The expansion header is located on the left side of the Crazyflie. It is a 10x2 pin 1.27mm (0.05") pitch trough-hole footprint which comes unmounted. The idea with the through-hole is that it makes it possible to mount expansion boards on either or both sides. It would even be possible to stack several on top of each other.
+The expansion header is located on the left side of the Crazyflie. It is a 10x2 pin 1.27mm (0.05") pitch through-hole footprint which comes unmounted. The idea with the through-hole is that it makes it possible to mount expansion boards on either, or both, sides. It would even be possible to stack several on top of each other.
 The header is divided into two parts. The JTAG part, pin 1 to 10, and the buss/power part, pin 11 to 20. The UART RX/TX is located on the JTAG part because on many FTDI based JTAGs it is possible to use one channel for serial communication which can be very handy when debugging.

Bitcraze Wiki

User Tools

Site Tools

Differences

Page Tools