Differences

This shows you the differences between two versions of the page.

--- doc:lps:reference-setup [2017-05-17 16:12]
macke removed
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Prerequisites ======
-In order to illustrate how to set up a system we document a reference system and how we've set it up. The referance system is based on the [[https://store.bitcraze.io/collections/bundles/products/indoor-explorer-bundle|Indoor explorer bundle]] which contains the following:
-  * 6 x Loco positioning node
-  * 1 x Crazyflie 2.0
-  * 1 x Loco positioning deck
-  * 1 x Crazyradio PA
-====== Reference set-up ======
-In our reference setup we have placed 3 anchors above and 3 anchors bellow the flight area, shaped in inverse triangles. This allows to get good accuracy in X, Y and Z.
-This is the reference system from which measurement where taken:
-{{:doc:lps:locorefv3.png|}}
-{{ :doc:lps:crazyflie_isometric_drawing_2.png?600 |}}
-====== Measurements taken from our reference set-up ======
-To validate the system we took a series of measurement from the reference system. You can see the results in the page [[misc:investigations:lps-precision|Measurements of accuracy and precision of the Loco Positioning system]].

Bitcraze Wiki