Differences

This shows you the differences between two versions of the page.

--- misc:hacks:taranisandroid [2015-07-17 00:17]
fred
+++ misc:hacks:taranisandroid [2015-07-17 01:04]
fred [Create a new model for the Taranis X9D (Plus)]
@@ Line 6: / Line 6: @@
 ===== Create a new model for the Taranis X9D (Plus) =====
-You should create a new model when using the Taranis as an USB Joystick:
+[[ https://wiki.bitcraze.io/misc:hacks:taranispython?#create_a_new_model_for_the_taranis_x9d_plus | Create a new model for the Taranis X9D (Plus)  ]]
-  * you can turn off both internal and external TX modules
-  * you need to configure the thrust input (Weight 50% and Offset 50%)
-    * otherwise you can not use the full travel of the axis assigned to thrust
-  * Servos menu
-    * invert Thrust (CH1)
-    * invert Eleron (CH3)
-You can also download the configuration as an EEPE file and install it with the OpenTX Companion application.
-  * USB Joystick EEPE file: {{:misc:hacks:usbjoystickforandroidcfclient.eepe.zip|}}
-  * Download the Companion application here: http://www.open-tx.org/2015/05/04/opentx-2.0.17
 ===== Configure the Crazyflie Android client =====
@@ Line 37: / Line 25: @@
     * Preferences -> **Flight control settings** -> **Mode**
-  - Before connecting to the Crazyflie, check that all axes are working (values should change)
+===== Use the Taranis X9D (Plus) with the Crazyflie Android client =====
+  - Before connecting to the Crazyflie, check that all axes are working (values should change in the Android app)
   - **Attention: Always make sure that the thrust stick is all the way down before connecting to the Crazyflie** :!:
   - Connect to the Crazyflie 2 over BLE
     * If you have a Crazyflie 1 you need to use a (powered) USB hub to connect both the Taranis RC transmitter and the Crazyradio USB dongle
+  - Fly the Crazyflie with the Taranis and have fun! :-D

Bitcraze Wiki

User Tools

Site Tools

Differences

Page Tools