Differences

This shows you the differences between two versions of the page.

--- misc:hacks:taranisandroid [2015-07-17 00:32]
fred
+++ misc:hacks:taranisandroid [2021-06-24 16:46] (current)
kimberly
@@ Line 1: / Line 1: @@
+<WRAP center round important 60%>
+This page has deprecated and will be archived. Please go to [[https://www.bitcraze.io/]].
+</WRAP>
 ====== Using a Taranis X9D (Plus) RC transmitter with the Crazyflie Android client ======
@@ Line 6: / Line 9: @@
 ===== Create a new model for the Taranis X9D (Plus) =====
-You should create a new model when using the Taranis as an USB Joystick:
+[[ https://wiki.bitcraze.io/misc:hacks:taranispython?#create_a_new_model_for_the_taranis_x9d_plus | Create a new model for the Taranis X9D (Plus)  ]]
-  * you can turn off both internal and external TX modules
-  * you need to configure the thrust input (Weight 50% and Offset 50%)
-    * otherwise you can not use the full travel of the axis assigned to thrust
-  * Servos menu
-    * invert Thrust (CH1)
-    * invert Eleron (CH3)
-{{:misc:hacks:taranis_mainscreen.png?direct&200|}}
-{{:misc:hacks:taranis_modelsetup.png?200| Model setup}}
-{{:misc:hacks:taranis_thrustinput.png?200| Thrust input settings}}
-{{:misc:hacks:taranis_servos.png?200| Servos settings}}
-You can also download the configuration as an EEPE file and install it with the OpenTX Companion application.
-  * USB Joystick EEPE file: {{:misc:hacks:usbjoystickforandroidcfclient.eepe.zip|}}
-  * Download the Companion application here: http://www.open-tx.org/2015/05/04/opentx-2.0.17
 ===== Configure the Crazyflie Android client =====
@@ Line 45: / Line 30: @@
 ===== Use the Taranis X9D (Plus) with the Crazyflie Android client =====
-  - Before connecting to the Crazyflie, check that all axes are working (values should change)
+  - Before connecting to the Crazyflie, check that all axes are working (values should change in the Android app)
   - **Attention: Always make sure that the thrust stick is all the way down before connecting to the Crazyflie** :!:
   - Connect to the Crazyflie 2 over BLE
     * If you have a Crazyflie 1 you need to use a (powered) USB hub to connect both the Taranis RC transmitter and the Crazyradio USB dongle
+  - Fly the Crazyflie with the Taranis and have fun! :-D

Bitcraze Wiki

User Tools

Site Tools

Differences

Page Tools