User Tools

Site Tools


projects:crazyflie2:expansionboards:breakout

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
projects:crazyflie2:expansionboards:breakout [2015-07-15 16:31]
127.0.0.1 external edit
projects:crazyflie2:expansionboards:breakout [2016-03-30 14:41] (current)
bjorn
Line 1: Line 1:
-====== ​Breackout expansion board ======+====== ​Breakout deck ======
  
-The breakout ​expansion board is designed to be soldered to 100mil breadboard or prototyping board. The aim is to ease prototyping by connecting breadboard circuits to Crazyflie 2.0. It can also be used to make a bigger system using Crazyflie 2.0 as a component. The breakout board is also very useful to measure signals, for example by sticking oscilloscope ​probe in the 100mil connector holes.+The breakout ​deck is designed to be soldered to 100mil breadboard or prototyping board. The aim is to ease prototyping by connecting breadboard circuits to Crazyflie 2.0. It can also be used to make a bigger system using Crazyflie 2.0 as a component. The breakout board is also very useful to measure signals, for example by sticking oscilloscope ​probes ​in the 100mil connector holes.
  
-The board is shipped without 100mil connector. To be used on a breadboard 100mil 10 pin male should be soldered.+The deck is shipped without ​100mil connector. To be used on a breadboard 100mil 10 pin male should be soldered.
  
 The 100mil connector is cabled directly to the expansion port connectors. The 100mil connector is cabled directly to the expansion port connectors.
projects/crazyflie2/expansionboards/breakout.1436970671.txt.gz · Last modified: 2016-02-04 16:17 (external edit)