Differences

This shows you the differences between two versions of the page.

--- projects:crazyflie:userguide:troubleshooting [2012-03-06 10:51]
macke
+++ projects:crazyflie:userguide:troubleshooting [2015-03-01 23:40]
fred
@@ Line 1: / Line 1: @@
-====== Intro ======
-====== Troubleshooting ======
-==== When I try to connect to the quadcopter I get an error and the red LED is not blinking ====
-This is almost always due to a missmatch in radio channel. Make sure to have the same radio channel for the quadcopter and the computer application.
-==== When I try to take off there seems to be no lift on one/or more motors ====
-Most of the time this is either due to the fact that there's dirt (like hairs) stuck around the axis of the motor between the motor house and the propeller or that the propeller is too close to the motor so there's friction between the two.
-If neither helps check that the [[projects:crazyflie:mechanics:index|propeller is attached in the right way]].
-==== The radio reception is really bad ====
-If the linkspeed is set to 2Mbit switch it to 250Kbps. This will normally increase/stabalize the radio reception. Since there are other devices (link WiFi) that might run on the same 2.4GHz channel try switching to a different channel for the quadcopter.

Bitcraze Wiki