Differences

This shows you the differences between two versions of the page.

--- projects:virtualmachine:jtag_debug [2016-10-10 11:36]
tobias
+++ projects:virtualmachine:jtag_debug [2021-06-02 11:21] (current)
kimberly
@@ Line 1: / Line 1: @@
+<WRAP center round important 60%>
+This page has deprecated and moved to the new documentation framework of the main Bitcraze website. Please go to [[https://www.bitcraze.io/documentation/system/]] or
+[[https://www.bitcraze.io/documentation/repository/]]
+</WRAP>
 ====== Prerequisites ======
@@ Line 5: / Line 11: @@
 ======= Crazyflie 2.0 =======
-The debug adapter is needed (or a cable could be made) to convert the ARM 20pin JTAG connector to the 6pin JST connector used on the Crazyflie 2.0. You will also need a JTAG/SWD debugger. The virtual machine is pre-configured to use the STLink v2 but can be set-up with any JTAG/SWD device that openOCD supports.
+The [[projects:crazyflie2:debugadapter:index|debug adapter]] is needed (or a cable could be made) to convert the ARM 20pin JTAG connector to the 6pin JST connector used on the Crazyflie 2.0. You will also need a JTAG/SWD debugger. The virtual machine is pre-configured to use the STLink v2 but can be set-up with any JTAG/SWD device that openOCD supports.
 The STM32F405 debug connector is located under the micro USB connector.

Bitcraze Wiki