User Tools

Site Tools


doc:lps:anchor-low-level-config

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
doc:lps:anchor-low-level-config [2019-03-22 13:03]
kristoffer created
doc:lps:anchor-low-level-config [2019-09-05 14:34] (current)
kimberly
Line 1: Line 1:
 +<WRAP center round important 60%>
 +This page is deprecated and is moved to the main Bitcraze website. Please go to [[https://​www.bitcraze.io/​docs/​lps-node-firmware/​master/​anchor-low-level-config/​]]
 +</​WRAP>​
 +
 ====== Node low level configuration ====== ====== Node low level configuration ======
  
Line 18: Line 22:
 </​code>​ </​code>​
  
-The serial port can be opened with your favorite serial console, picocom: <code bash>$ picocom /​dev/​ttyACM3</​code>​+The serial port can be opened with your favorite serial console, picocom: ​ 
 +<code bash> 
 +$ picocom /​dev/​ttyACM3 
 +</​code>​
  
  
Line 24: Line 31:
 Find the serial port with //ls// Find the serial port with //ls//
 <code bash> <code bash>
-ls -a /​dev/​tty.usb*+ls -a /​dev/​tty.usb*
 /​dev/​tty.usbmodem1415501 /​dev/​tty.usbmodem1415501
 </​code>​ </​code>​
Line 30: Line 37:
 To open the serial port To open the serial port
 <code bash> <code bash>
-screen /​dev/​tty.usbmodem1415501+screen /​dev/​tty.usbmodem1415501
 </​code>​ </​code>​
  
Line 59: Line 66:
 </​code>​ </​code>​
  
-press '​h'​ to get information on how to modify the configuration. Note: the node must be restarted for the configuration to be activated.+press '​h'​ to get information on how to modify the configuration. ​ 
 + 
 +Note: the node must be restarted for the configuration to be activated.
  
doc/lps/anchor-low-level-config.1553256218.txt.gz · Last modified: 2019-03-22 13:03 by kristoffer