User Tools

Site Tools


doc:lps:twr-reference-setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revision Both sides next revision
doc:lps:twr-reference-setup [2017-05-17 16:11]
macke created
doc:lps:twr-reference-setup [2018-04-23 14:06]
kristoffer
Line 1: Line 1:
-====== Prerequisites ======+====== Reference set-up using 6 anchors (TWR) ======
  
-In order to illustrate how to set up a system we document a reference system and how we've set it upThe referance system is based on the [[https://store.bitcraze.io/collections/bundles/products/indoor-explorer-bundle|Indoor explorer bundle]] which contains the following: +This reference system can be used to position in Two-way ranging mode (TWR)In this reference setup we have placed 3 anchors above and 3 anchors bellow the flight area, shaped in inverse triangles. This allows to get good accuracy in X, Y and Z. There are [[misc:investigations:lps-precision|measurements of accuracy and precision]] for this reference system.
-  * 6 x Loco positioning node +
-  * 1 x Crazyflie 2.+
-  * 1 x Loco positioning deck +
-  * 1 x Crazyradio PA+
  
-====== Reference set-up ======+{{:doc:lps:loco_ref_system_6_anchors.png?1200|}}
  
-In our reference setup we have placed 3 anchors above and 3 anchors bellow the flight area, shaped in inverse triangles. This allows to get good accuracy in X, Y and Z.+====== Reference set-up using 8 anchors (TDoA/TWR) ======
  
-This is the reference system from which measurement where taken: +This reference system can be used to position in Two-Way Ranging mode (TWR) and Time Difference of Arrival mode (TDoA). In this reference setup we have placed 4 anchors above and 4 anchors bellow the flight area, shaped like a box. Note the numbering of the anchors, this allows to get good accuracy in X, Y and Z
-{{:doc:lps:locorefv3.png|}}+
  
-{{ :doc:lps:crazyflie_isometric_drawing_2.png?600 |}}+{{:doc:lps:loco_ref_system_8.png?1200|}}
  
-====== Measurements taken from our reference set-up ====== 
-  
-To validate the system we took a series of measurement from the reference system. You can see the results in the page [[misc:investigations:lps-precision|Measurements of accuracy and precision of the Loco Positioning system]]. 
doc/lps/twr-reference-setup.txt · Last modified: 2020-05-12 14:10 by kimberly