Differences

This shows you the differences between two versions of the page.

--- projects:crazyflie2:expansionboards:qi [2015-07-15 16:31]
127.0.0.1 external edit
+++ projects:crazyflie2:expansionboards:qi [2019-02-13 09:30]
macke
@@ Line 1: / Line 1: @@
-====== Qi Wireless charging expansion board ======
+====== Qi Wireless charging expansion deck ======
-The Qi wireless charging expansion board allows charging the Crazyflie 2.0 battery with a standard Qi wireless charger. The board is designed to provide up to 1A which means that the charging speed should be equivalent to USB charging. Using a wireless charger is convenient (just put the Crazyflie on the charger and pick it up later once charged) but mostly it allows new and interesting use cases such as autonomously landing on the charger to enable an extended autonomous flight system.
+The Qi wireless charging expansion deck allows charging the Crazyflie 2.0 battery with a standard Qi wireless charger. The deck is designed to provide up to 1A which means that the charging speed should be equivalent to USB charging. Using a wireless charger is convenient (just put the Crazyflie on the charger and pick it up later once charged) but mostly it allows new and interesting use cases such as autonomously landing on the charger to enable an extended autonomous flight system.
-The board is designed to be installed as the last board on the bottom of the Crazyflie 2.0. It does not have pass-through holes for the expansion port connector.
+The deck is designed to be installed as the last deck on the bottom of the Crazyflie 2.0. It does not have pass-through holes for the expansion port connector.
-This expansion board has very few Crazyflie 2.0-specific components, so it can still be used as a wireless 5V power supply for other projects.
+This expansion deck has very few Crazyflie 2.0-specific components, so it can still be used as a wireless 5V power supply for other projects.
-The board works by injecting 5V into the Crazyflie 2.0 VUSB line. As a consequence, it is not recommended to connect the Crazyflie to a 5V USB charger while the Qi expansion board is installed. Furthermore, do not connect a USB charger while a Qi-equipped Crazyflie 2.0 is sitting on a wireless charger.
+The deck works by injecting 5V into the Crazyflie 2.0 VUSB line. As a consequence, it is not recommended to connect the Crazyflie to a 5V USB charger while the Qi expansion deck is installed. Furthermore, do not connect a USB charger while a Qi-equipped Crazyflie 2.0 is sitting on a wireless charger.
 ===== Specification =====
@@ Line 13: / Line 13: @@
   * Can supply up to 1A at 5V
   * Supports the Qi wireless charging standard (WPC V1.1)
-  * 1-wire memory for automatic expansion board detection
+  * 1-wire memory for automatic expansion deck detection
   * Designed for mounting under the Crazyflie 2.0
   * Mechanical specification:
@@ Line 21: / Line 21: @@
 ===== Charger compatibility =====
-The Qi wireless charger expansion board should work with any Qi-compatible wireless charger pad. It has been tested with an off-the-shelf, no-name charger pad.
+The Qi wireless charger expansion deck works with WPC 1.1 compatible charger pads.
 ===== Schematic =====
-Qi expantion board {{:projects:crazyflie2:expansionboards:qi_revb1.pdf|schematic}}.
+Qi expansion deck {{:projects:crazyflie2:expansionboards:qi_revb1.pdf|schematic}}.

Bitcraze Wiki

User Tools

Site Tools

Differences

Page Tools