Differences

This shows you the differences between two versions of the page.

--- projects:crazyflie2:expansionboards:proto [2015-07-15 16:31]
127.0.0.1 external edit
+++ projects:crazyflie2:expansionboards:proto [2016-03-30 14:40]
bjorn
@@ Line 1: / Line 1: @@
-====== Prototype expansion board ======
+====== Prototyping deck ======
-The prototype expansion board allows to prototype electronic circuit to be attached on Crazylfie 2.0.
+The prototyping deck allows electronic circuits to be attached on Crazyflie 2.0.
-Both throw holes some smd components can be soldered to the board. The shape of the pads makes it possible to solder SMD capacitor and resistor which saves space and weight.
+Both through holes and SMD components can be soldered to the deck. The shape of the pads makes it possible to solder SMD capacitor and resistor which saves space and weight.
 The two pad rows that are closest to the expansion connector are connected to the connectors.
@@ Line 11: / Line 11: @@
 ===== Specification =====
   * Makes all 20 pins in the Crazyflie 2.0 expansion port available
-  * 40 pads for prototyping (supporting both though hole and SMD components)
+  * 40 pads for prototyping (supporting both through hole and SMD components)
   * Footprint for optional 1-wire memory (not mounted)
   * Mechanical specification:
@@ Line 19: / Line 19: @@
 ===== Detection memory =====
-If you want your prototype board to be detected automatically by the Crazyflie, for example to activate your driver code when the board is connected, you can solder a one-wire memory DS28E05 in the pads near P1 pin 10. For more information about the automatic expansion board detection see [[projects:crazyflie2:onewire|Crazyflie 2.0 onewwire expansion board detection]].
+If you want your prototype deck to be detected automatically by the Crazyflie, for example to activate your driver code when the deck is connected, you can solder a one-wire memory DS28E05 in the pads near P1 pin 10.

Bitcraze Wiki

User Tools

Site Tools

Differences

Page Tools